
With proven durability and ACTIVATE® Technology, MAXAM® is suitable for most residential and commercial applications throughout New Zealand. Activate® is an advanced metallic coating applied to the steel before the COLORSTEEL® paint system, enhancing corrosion resistance and improving long-term durability.

Designed for sites exposed to severe environmental conditions, ALTIMATE® provides enhanced durability and confidence in challenging locations. It combines a marine grade aluminium substrate with proven COLORSTEEL® paint technology to deliver superior corrosion protection where salt exposure is at its most extreme.
Best suited for
Most New Zealand environments including inland, urban and coastal
Extreme marine, volcanic and highly corrosive environments
Core technology
Activate® technology for enhanced corrosion resistance
Marine-grade aluminium substrate for extreme corrosion resistance
Base material
Aluminium / zinc / magnesium alloy-coated steel substrate
Marine-grade aluminium alloy manufactured to AS/NZS 1734
Metallic coating
Magnesium-enhanced AM150 metallic alloy coating manufactured to AS1397
Not required
Paint system
Multi-layer COLORSTEEL® paint system with anti-corrosive pre-treatment, primer and high-quality polyester topcoats
Multi-layer COLORSTEEL® paint system with anti-corrosive pre-treatment, primer and high-quality polyester topcoats
Base metal thickness
0.40 mm or 0.55 mm
0.90 mm
Colour availability
Available in all COLORSTEEL® colours
Available in all COLORSTEEL® colours
Guidelines for use
COLORSTEEL MAXAM® is designed to be suitable for most New Zealand environments, ranging from mild/inland through to very severe coastal. For more extremely severe coastal environments, COLORSTEEL ALTIMATE® may be more suitable.
Your COLORSTEEL® supplier will be responsible for ensuring that COLORSTEEL MAXAM® is installed in accordance with the COLORSTEEL® Installers Guide. COLORSTEEL MAXAM® should not be used in the following applications:
Copper or brass pipes must not be allowed to discharge onto COLORSTEEL MAXAM® or be allowed to come into contact with them.
Guidance on the use of other materials in proximity to COLORSTEEL MAXAM® is covered by the COLORSTEEL® Installation Guide. Mixing brands of pre-painted steel material on the same building is not recommended.
Soft zinc or aluminium soft edge flashings should be used. Marking with lead pencils is not advised. Sealing washers should be low carbon non conducting.
Before using COLORSTEEL MAXAM® near sources of heavy industrial pollution or in geothermal areas, contact New Zealand Steel's Customer Care team.
COLORSTEEL ALTIMATE® is warranted in extremely severe environments and is suitable for a wide range of roll-formed roof and wall claddings, rainwater accessories and general building products. Before using ALTIMATE® products in aggressive environments such as intensive animal shelters, swimming pools, chemical manufacturing plants, geothermal areas, or embedded in concrete, please contact New Zealand Steel's Customer Care team.
ALTIMATE® is compatible in contact with ZINCALUME®, COLORSTEEL MAXAM® and galvanised steel products, but care should be taken to avoid contact with the steel substrate of these products.
COLORSTEEL ALTIMATE® must not be used in wet contact with iron, steel, stainless steel, lead, timber or butyl rubber.